(£249.60 incl VAT)
FREE delivery to UK on orders over £500
100% Money Back
30 Day Guarantee
International Shipping
Over 100 Countries
PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits.
CAN-2088D is a PWM slave module of DeviceNet protocol. It has 8 PWM output channels and 8 high speed counter channels. It can be used to develop powerful and cost effective analog control systems.
| LED Indicators | |
|---|---|
| Status |
1 x Power 2 x DeviceNet status |
| Digital Input | |
|---|---|
| Channels | 8 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink |
| ON Voltage Level | +5.5 ~ +30 V |
| OFF Voltage Level | <3.5 V |
| Input Impedance | 4.7 kΩ, 1/4 W |
| PWM | |
|---|---|
| Channels | 8 |
| Sink/Source (NPN/PNP) | Source |
| Load Current | 1 mA |
| Frequency | 0.2 ~ 500 kHz (non-continuous) |
| Duty Cycle | 0.1 ~ 99.9 % |
| Mode | Burst mode, Continuous mode |
| Burst Count | 1~65535 counts |
| Trigger Start | Hardware (Start and Stop) or Software (Start and Stop) |
| DeviceNet | |
|---|---|
| Ports | 1 |
| Connection Supported |
1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
| Baud Rate | 125 kbps, 250 kbps, 500 kbps |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| Node ID | 0 ~ 63 |
| Shutdown Message | Yes |
| Heartbeat Message | Yes |
| Subscribe | Group 2 Only Server |
| Power | |
|---|---|
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 2 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 32.3 x 99 x 77.5 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
We have communicated with the following DeviceNet masters or gateways.
PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits.
CAN-2088D is a PWM slave module of DeviceNet protocol. It has 8 PWM output channels and 8 high speed counter channels. It can be used to develop powerful and cost effective analog control systems.
| LED Indicators | |
|---|---|
| Status |
1 x Power 2 x DeviceNet status |
| Digital Input | |
|---|---|
| Channels | 8 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink |
| ON Voltage Level | +5.5 ~ +30 V |
| OFF Voltage Level | <3.5 V |
| Input Impedance | 4.7 kΩ, 1/4 W |
| PWM | |
|---|---|
| Channels | 8 |
| Sink/Source (NPN/PNP) | Source |
| Load Current | 1 mA |
| Frequency | 0.2 ~ 500 kHz (non-continuous) |
| Duty Cycle | 0.1 ~ 99.9 % |
| Mode | Burst mode, Continuous mode |
| Burst Count | 1~65535 counts |
| Trigger Start | Hardware (Start and Stop) or Software (Start and Stop) |
| DeviceNet | |
|---|---|
| Ports | 1 |
| Connection Supported |
1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O |
| Baud Rate | 125 kbps, 250 kbps, 500 kbps |
| Terminal Resistor | Switch for 120 Ω terminal resistor |
| Specification | Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| Node ID | 0 ~ 63 |
| Shutdown Message | Yes |
| Heartbeat Message | Yes |
| Subscribe | Group 2 Only Server |
| Power | |
|---|---|
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 2 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 32.3 x 99 x 77.5 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
We have communicated with the following DeviceNet masters or gateways.
